Stainless Steel Fin Tube Suppliers in China
Stainless steel fin tubes are a type of heat exchanger tube that have fins attached to the outer surface.
Plain Stainless Steel Tubes Datang will be procured for finning, duly Hydro Tested and Eddy Current Tested as per material specification and code, from plain tube manufacturers only, as per customer requirement.
If customer require, Datang will procure plain Stainless Steel Tubes, duly inspected, approved and released by customer or Third Party Inspection Agency, at plain Tubes manufacturer’s end.
These fins increase the surface area of the tube, allowing for more efficient heat transfer between the fluid inside the tube and the surrounding environment.
Datang Quality Control for Stainless Steel Finned Tube
The quality of the stainless steel finned tube is assured by hydrostatic or pneumatic testing, eddy current testing and tensile testing to verify the mechanical bond between the inner tube and the outer fins.
Datang Delivery condition:
Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with Anti-rust at both ends of stainless steel finned tube.
Stainless Steel Fin Tube for Heat Exchanger
| Specifications | Details |
|---|---|
| Standard | ASTM 304 304L 316 316L |
| Tube OD | ≥8mm |
| Tube Wall Thickness | Unlimited |
| Fin Type | Crimped |
| Tube Length | Unlimited |
| Fins Thickness | 0.3mm 0.4mm 0.5mm |
| FPI | Unlimited |
| Finishing | Tubes can be supplied in mechanical polished with various grits like at 80, 120, 240, 320, 400, 600 grit and mirror polished. |
Stainless Steel Low Fin Tubes are available with exact lengths required by customer, maximum upto 20 Meters.
Stainless Steel Low Finned Tubes are available with plain portion at both ends, as per customer specification.
Stainless Steel Fin Tubes are available with Intermediate landings (plain portion for baffle sheet support), as per customer requirement.
Stainless Steel Fin Tubes will be supplied, duly Hydro Tested, after finning. Stainless Steel Fin Tubes will be supplied in “As Finned Temper”.
- Diameter : 12.70mm, 15.88mm, 19.05mm, 22.20mm, 25.40mm & 38.10mm
- Wall thickness : 1.42mm up to 3.25mm
- No. of Fins per Inch : 19, 26, 28, 32 FPI
We shall supply Stainless Steel Fin Tubes, duly inspected and approved by Customer or any Third Party Inspection Agency, as per customer specific requirement, at our end before dispatch.
We shall provide MTC along with our supply documents.
With the overall success of the transfer of heat, Finned Tubing is wildly popular in the oil and gas industry. As liquid flows through the inside of a finned tube there is often air or some other gas flowing outside of the tube. Most Finned Tube heat exchangers are crossflow. They act as a great heat exchanger when one of the transfer variables is gas or air. Extruded Fin Tubes, tubes manufactured with extrusion that is radially crushed on the lining, often provide a highly efficient surface area for a heat exchanger tube. The kinds of transfers these tubes are often used for in this sector include transfer from liquid to gas, thermal fluid to air, and vapor to gas.
Stainless steel fin tubes are commonly used in various industries, including HVAC (heating, ventilation, and air conditioning), refrigeration, power generation, and petrochemical plants. They are particularly suitable for applications where corrosion resistance and durability are important.
- Mechanical Purpose
- Oil and Gas
- Water Line
- Ship Building
- Fluid Transportation
- Drilling and Minning
- Idlers and Conveyors
| Properties | Value | Explanation |
|---|---|---|
| Tensile Strength | > 500 MPa | Suitable for Mechanical Stress and High Pressures |
| Corrosion Resistance | High (e.g., > 90%) | Prevents Corrosion and Damage. |
| Thermal Conductivity | Moderate (15-30 W/m·K) | Fins Provide Excellent Heat Transfer Efficiency. |
| Service Life | 15-30 years | Long-term Performance in a Variety of Applications. |
| Cleanability | Easy to maintain | Smooth Surfaces Help You Clean Quickly. |
| Design Flexibility | Flexible Configuration | Readily Adjusts to Many System Needs. |
| Working Steps | Explanation |
|---|---|
| Circulation of The Fluid | A Heated Liquid Passes Through Stainless Steel Tube |
| Heat Conversion | Heat Moves From the Fluid to the Surface of the Tube. |
| Fins Extension Area | The Surface Area for Heat Exchange is Increased by Fins on Tubes. |
| Movement of Air | Air is Circulated Over Fins by Forced or Natural Convection. |
| Heat Discharge | The Atmosphere is Filled With Heated Air. |
| Backflow | Re-entering the Cycle, Cool Fluid is Heated Again. |
| Feature | Extruded Fin Tube | Embedded Fin Tube |
|---|---|---|
| Method Of Manufacturing | From the Tube Material, Fins Are Extruded. | In the Tube Wall, Fins Are Cast or Machined. |
| Efficiency Of Heat Transfer | High Because of the Fins’ Huge Surface Area. | Excellent, but It Could Not Be as High as Extruded. |
| Structural Integrity | Good Connection Between the Tube and Fins. | Integral Design: Fins Are a Component of the Tube |
| Cost | Generally Greater as a Result of Sophisticated Production. | Usually Less Expensive |
| Weight | Due to the Fin Material, Slightly Heavier. | Lighter Since the Tube Material Contains Fins. |
| Fouling Resistance | Fewer Chances to Prompt Problems; More Easily Cleaned. | Can Build Up Deposits and Might Need Extra Upkeep. |
| Uses | Frequently Seen in Heat Exchangers | Utilized in a Number of Applications including HVAC |
Related Product
Availability
Stainless steel fin tubes are available from manufacturers and distributors specializing in heat exchanger products. It is important to specify the specific requirements, such as dimensions, material grade, and fin type, when purchasing stainless steel fin tubes.
- Diameter : 12.70mm, 15.88mm, 19.05mm, 22.20mm, 25.40mm & 38.10mm
- Wall thickness : 1.42mm up to 3.25mm
- No. of Fins per Inch : 19, 26, 28, 32 FPI
Stainless Steel Low Fin Tubes are available with exact lengths required by customer, maximum upto 20 Meters.
Stainless Steel Low Finned Tubes are available with plain portion at both ends, as per customer specification.
Stainless Steel Fin Tubes are available with Intermediate landings (plain portion for baffle sheet support), as per customer requirement.
Stainless Steel Fin Tubes will be supplied, duly Hydro Tested, after finning. Stainless Steel Fin Tubes will be supplied in “As Finned Temper”.
We shall supply Stainless Steel Fin Tubes, duly inspected and approved by Customer or any Third Party Inspection Agency, as per customer specific requirement, at our end before dispatch.
We shall provide MTC along with our supply documents.
With the overall success of the transfer of heat, Finned Tubing is wildly popular in the oil and gas industry. As liquid flows through the inside of a finned tube there is often air or some other gas flowing outside of the tube. Most Finned Tube heat exchangers are crossflow. They act as a great heat exchanger when one of the transfer variables is gas or air. Extruded Fin Tubes, tubes manufactured with extrusion that is radially crushed on the lining, often provide a highly efficient surface area for a heat exchanger tube. The kinds of transfers these tubes are often used for in this sector include transfer from liquid to gas, thermal fluid to air, and vapor to gas.
1. Material: Stainless steel finned tubes are typically constructed from stainless steel, which offers excellent corrosion resistance, high strength, and durability. Stainless steel alloys such as 304, 316, or duplex stainless steels are commonly used for their resistance to corrosion and harsh operating environments.
2. Heat Transfer Efficiency: The addition of fins on the outer surface of the stainless steel tubes significantly increases the surface area available for heat transfer. This improved surface area promotes efficient heat exchange between the fluid inside the tube and the surrounding medium. Stainless fin tubes are widely used in applications where maximizing heat transfer efficiency is critical.
3. Versatility: Stainless steel finned tubes can be customized to meet specific design and performance requirements. The fin geometry, such as fin height, thickness, and spacing, can be tailored to achieve the desired heat transfer characteristics. This versatility allows stainless fin tubes to be used in a wide range of industries and applications, including HVAC systems, heat exchangers, boilers, condensers, and refrigeration units.
4. Corrosion Resistance: Stainless steel is highly resistant to corrosion, making stainless steel finned tubes suitable for various environments and fluids. They can withstand exposure to corrosive gases, liquids, and high-temperature environments without degradation. This corrosion resistance ensures the long-term performance and reliability of stainless fin tubes.
5. Longevity: With proper design, material selection, and maintenance,stainless steel finned tubes can have a long lifespan. Stainless steels durability, combined with the protection provided by the finned design, contributes to their extended service life. Routine inspections and maintenance practices can help ensure optimal performance and detect any potential issues early on.
stainless steel finned tubes are an effective solution for heat transfer applications that require high efficiency and resistance to corrosion. The specific design, dimensions, and material selection of the stainless fin tubes should be determined based on the specific requirements of the application and operating conditions.